DRAKA MARINE, OIL & GAS CABLE PRODUCTS

Home >> DRAKA MARINE, OIL & GAS CABLE PRODUCTS

draka mog a@0

Company Profile:

LINKING OIL & GAS FROM END TO END
From drilling, extraction and storage equipment to platform and processing facilities operation, Draka/Prysmian’s state-of-the-art cable systems support many major customers in the Oil, Gas and Petrochemical industries, along with related businesses.

get-attachment.aspxget-attachment-1.aspx

BOSTRIG TYPE P BOSTRIG MARINE CABLE

 

 

 

BostrigTM Type P Marine and Offshore Cable is primarily designed for power, control, signal and instrumentation applications for offshore, land rigs, marine vessels and oil and gas drilling rigs. Bostrig cables have excellent resistance to oil, abrasion, moisture, sunlight and ester-based mud (Type P-MR). They are suitable for use in Class I, Division I and Zone I applications (armored & sheathed) and meet the crush and impact resistance requirements (C&IR) of UL 2225. The standard insulation has a continuous operating temperature of 125oC allowing for higher ampacity levels. Larger diameter cables carry a new flexible design. They satisfy Transport Canada’s cold bend at -40oC and cold impact at -35oC (CSA C 22.2 No. 0.3). This product is readily available in an unarmored version.

BOSTRIG TYPE P-VFD POWER CABLE 2000V

Bostrig VFD a

BostrigTM Type P shielded three conductor VFD Marine and Offshore Cable is designed specially for use with variable frequency AC motor drives. This cable is designed to signicantly mitigate the deleterious e ects of high frequency harmonics and electromagnetic interference (EMI) on the motor /drive system as well as the adjacent environment.

BostrigTM VFD cables have excellent resistance to oil, abrasion, moisture, vibration, sunlight, and ester based muds (Type P-MR). They are suitable for use in Class 1, Division 1 o shore applications (armored and sheathed) and complies with UL 1277 Type TC-ER extended runs requirements.

The standard insulation has a continuous operating temperature of 125°C, allowing for higher ampacity levels. These cables also meet cold bend requirements of -40°C and cold impact of -35°C (CSA 22.2 N0. 0.3).

This product may be manufactured in an unarmored or armored and sheathed version.

 

BOSTMARINE TYPE X, T/N and LSX

bostmarine

 

 

 

BOSTMARINE Type X 600 volt cables are suitable for use in commercial marine applica- tions where flame retardant cables having excellent physical and electrical properties are required. The insulation system has a continuous operating temperature of 90°C. These cables meet all test requirements of IEEE 45 (1998), IEEE 1580 (2001), UL 1309 and the Flame Test in IEC 60332-3, Category A. They are listed by ETL, a nationally recognized testing laboratory, per IEEE 45 (1998), IEEE 1580 (2001) and UL 1309/CSA 245 for 600 volts. Type X cables are Type Approved by ABS and LRS. Aluminum and bronze armored versions are available. Optional outer PVC sheath available upon request.

 

SHIPLINE and SHIPLINE PLUS SHIPBOARD CABLE

shipline

 

 

 

 

TOP DRIVE SERVICE LOOP ASSEMBLIES

A variety of standard and custom service loops providing power, control, instrumentation, and data signals to land and offshore top drive drilling motors.

 

Additional Information